Infrared Water Heater Electric Carbon Boiler Infrarotkessel. The unusual design of this tank provides a considerable heating surface (larger than one square meter) wrapped in a special heating cover. Infrared water heater can produce unparalleled hot water quantities compared with similar electrically heated water dipped products.
Can ensure significant energy savings and respect for the environment. Can modulate power consumption, which is a very important prerequisite for energy savings and rationalisation. Made up of carbon fibre cables (carbon fibres cut power demand by 40% given the same target temperature). Capacity 50/75/100 litres (please chose from drop-down menu). Maximum operating pressure 6 bars.
TIG and micro-Plasma welded AISI 316L stainless steel body with pickling treatment both inside and outside. Stray current and corrosion protective device (replaceable magnesium anode). Hot and cold water connections: ½. High density, extra thick (40mm) PU foam insulation CFC and HCFC-free.
Epoxy powder painted sheet steel shell. Anti-static, shock proof ABS lower and upper plates. Display indicating storage water temperature, operating power range, ON/OFF status, time.
Thermostatic valve for manual control of output water temperature. Optimised power consumption due to power splitting. (610W - 1610W - 1780W in Plus mode). Electronic control unit provided with a display unit. Two daily working time slots (two-rate time-of-day tariff option) and managed power output.Recommended to install an expansion tank to compensate for the increased volume of heated water. Install an inlet pressure adjustment unit.
Considering that feed water is usually rather hard (up to 25°f), recommended to install a polyphosphate filter to avoid calcium precipitate in the boiler. For intensive use or water harder than 25°f a water softener must be installed. Spare parts are available upon request. WRAS Approved Optional G3 System Installation Kit. Catalyc Non-Chemical Water Conditioner Pipe.
By installing an ActivFlo Chemical Free Water Conditioner you can reverse and stop all the effects of hard water. No more limescale build up in your appliances, taps, showers and sinks. Up to 50% less soap and washing powder needed. No spotting or marks on stainless steel sinks and worktops.
Improvement in some dry skin conditions. Better tasting water from the tap. And, The benefits you dont see. The build-up of limescale can eventually lead to the failure of parts within washing machines, dishwashers, showers and boilers.
By installing an ActivFlo water conditioner you will safely condition your hard water which will help to prolong the life of your appliances. Your hot water cylinder can also be affected by limescale and over time the efficiency will be reduced as the coil and pipes get coated with limescale and get affected by corrosion. WRAS Approved G3 System Installation Kit For Unvented System.
Outlet Temperature Adjustment Range: 30C to 50C Temperature Stability: ±2C Maximum Hot Inlet Temperature: 85C DO8 Working Pressure Range:0.2 to 1.0 bar : Low Pressure 1.0 to 5.0 bar : High Pressure Min Temp Differential (Mix to Hot) for Fail-Safe 10C Max. Pressure Inlet Differential: 5 : 1. Safety relief valve & Pressure reducing valve SET.Intas unvented group set has been specifically designed to control the pressure to unvented hot water systems. The set provides the essential components including a check valve, non- adjustable Pressure Reducing Valve (PRV) set to 3 bar and a Safety Relief Valve (SRV) factory set to 6 bar. The 300 micron filter can be removed for cleaning and re-installed. PRV factory set to 3 bar. SRV factory set to 6 bar (21822200 - 4.75 bar). Available with or without expansion vessel connection. Range of connection sizes to available. Conforms to BS EN 1567. Expansion Vessel for water heaters and for any type of pump.
Factory pre-charge: 1.5-3 bar. To meet the requirements of water regulations G19.1, G19.3 and G19.4 for sealed or unvented systems a tundish must be used. The discharge pipework from the expansion valves, temperature relief valves and the temperature and pressure relief valves must fitted in accordance with the local and national water byelaws and also the building regulations Part G3.
Meets the requirements of G19.1, G19.3 & G19.4 and Building regulations Part G3. WRAS approval relates to 15mm x 22mm straight tundish only. Intas WRAS approved and CPR compliant safety relief valves have been designed to protect closed circuit water heating systems from over pressure which can build up as a consequence of heating the water or any other fault conditions resulting in excessive pressure.Available with 1/2" or 3/4" connections and a range of pre-set discharge. Prevents damage to heating systems by relieving excess pressure. Range of factory set discharge pressures available. Available with 12 or 34 FxF and MxF connections. Catalyc Non-Chemical Water Conditioner Pipe 15mm. Standard approaches to water treatment rely heavily on harmful chemicals, which must be replenished frequently. Catalyc Non-Chemical Water Conditioner Pipe does away with any need for such chemicals and will comfortably fit in the most convenient of spaces, with minimal maintenance needed. Designed and engineered for life, Catalyc Non-Chemical Water Conditioner Pipe will easily last 15 years in your family home. Hard water is a result of the harmless minerals calcium and magnesium in your water supply. These have been collected as natural rainwater flows underground.
Although harmless hard water can affect your home in several ways. Limescale appears and builds up in sinks, baths, and shower doors. The flow of water in shower heads and taps reduces as limescale builds up. The build-up of limescale can damage and reduce the efficiency of your appliances and heating systems. Requires much more washing powder when doing laundry.Increases the need for descalers throughout your home. How does a water conditioner work? In hard water, there are calcium carbonate crystals. As this hard water passes through the ActivFlo, two things happen. Its exposed to a small electrical charge on the surface of the alloy and it a. Lso experiences a drop in pressure, caused by the alloys shape. These actions cause the calcium carbonate to form an insoluble aragonite crystal.
These crystals, microscopic in size, are smoother and do not have the same bonding properties as calcium carbonate. This means that they cant stick to pipework, heating elements, shower heads etc.
They remain suspended in the water and ultimately flow out through the drain. How does a water softener work? Unlike many water softeners the Activ Flo Water Conditioner does not use any chemicals which need regular replenishment.
The Activ Flo can be easily installed in to your existing water system and left to do its job with little or no maintenance. Once installed and connected to the domestic power supply the Activ Flow uses an electromagnetic to alter the properties of the minerals from your water supply that cause hard water. This then prevents the particles from building up and forming limescale in your appliances, taps, showers and other areas of your home. The item "Electric Boiler Infrared Water Heater Carbon 50L 75L 100L Infrarotkessel IR ECO" is in sale since Wednesday, October 18, 2017.
This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Water Heaters & Boilers". The seller is "ecoinfraredtech" and is located in Bournemouth. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, United States, Canada, Brazil, Japan, New Zealand, Israel, Hong Kong, Norway, Indonesia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.