In most US homes, the heating of water is usually the second largest energy expense, after space heating and cooling. Typical storage tank water heating can account for up to 30% of the average home energy bill. Inconvenient situations such as waiting for the hot water to reach the faucet, finding yourself with no more hot water while having to wait for the tank to heat up again, or constantly heating a storage tank of water even when it is not in use all add up to this expense. The Atmor Tankless Electric Instant Water Heater is the convenient solution you have been looking for - delivering to you an endless supply of hot water instantaneously at the point of use only when you need it.
Suitable for residential and commercial applications. This compact device can be installed against the wall either under the sink out of sight or near the point of use. Unit requires a 30 Amp dedicated single-phase breaker. This is NOT a plug in unit. Required wire size: 10 AWG.
Standard 1/2 NPT (straight thread) fittings. Maximum flow rate is 0.5 GPM.
Please note that the 3kw/110v unit is designed for SINGLE SINK application in areas with at least 57°F ground water temps. Maximum temperature rise possible for unit is 45°F. Ideal for single sink application in areas with at least 57° ground water temperature. Maximum flow rate 0.5 GPM (Gallons per Minute) = 45° F temperature rise.
Slower flow rate = higher temperature rise. Requires a direct connection to a 30 Amp single-phase breaker.Instant and endless hot water on demand without the wait or worry of ever running out and nominal water volume is 0.11 gallon. Includes a 0.5 GPM Aerator for sink faucet and Pressure Relief Device (PRD). Max tested working pressure: 16 BAR (230 PSI). Did you know in most US homes the heating of water is the second largest energy expense, after space heating and cooling? Typically, storage tank water heating can account for up to 30% - 50% of the average home energy bill. Waiting for the hot water to reach the faucet, finding yourself with no more hot water while having to wait for the tank to fill up again, constantly heating a storage tank of water even when its not in use all add up to this expense. Atmor Tankless Electric Instant Water Heaters are the convenient and efficient solution you have been looking for!
Atmor delivers an endless supply of hot water instantaneously at the point of use only when you need it. There is a direct relationship between the flow rate and temperature rate. If the unit is used in a colder region a higher temperature rise is required to heat the water and the amount of fixtures will be much more limited than if used in a warmer region. So what model would fit my needs?Let's say you live in the Northern California and need a solution for a sink and shower. Based off the map the coldest temp your inlet water reaches is 51F. A typical shower is 104F. You would need an additional 53 degrees to hit your desired shower temperature of 104F. The 10.5kW would be the ideal solution. GPM would be around 2.5GPM. When sized properly, Atmor will provide endless hot water. Controlling the flow rate (Gallons Per Minute) into the unit is essential to ensure proper consistent temperature rise in order to meet your desired hot water temperature. A Pressure Relief Device (PRD) is included with your unit and must be installed on your water heater inlet cold connection. A full list of specifications can be referenced from the chart of above. The item "Instant Hot Water Heater Electric Tankless On Demand House Shower Sink RV 110V" is in sale since Wednesday, June 27, 2018. This item is in the category "Home & Garden\Home Improvement\Heating, Cooling & Air\Water Heaters\Tankless Water Heaters". The seller is "24hours-deal" and is located in Multiple Locations. This item can be shipped to United States.